|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotating
Bur Holder. For 3/32" Burs and Small Tools. Stores and organizes 114
3/3" burs. Measures: 6 1/2" wide by 4" high and has a center cup (3"
deep x 2 3/4" dia.) to hold small tools such as files, scribes &
screwdrivers. Burs not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The
newest model from Foredom. 1/6 HP ball-bearing SR motor. Operates at
speeds up to 18,000 RPM. Forward and reverse switch. 39" long shaft in
protective sheath with steel liner and silencer. Hang-up style model.
110VAC. One year warranty.
Kit includes:
-
#30 hand piece
-
FCT solid-state electronics variable-speed foot control in plastic housing
-
1/6 HP motor
-
chuck key
-
54 piece professional accessory kit with rotating bur and tool holder.
-
tube of lubricating grease
|
Rotating Bur and Tool Holder. For 1/8" and 1/4" Shank Burs, Drill Bits 1/16" - 5/32". Organizes up to 112 accessories. Stores: 92 1/8" shank and 13 1/4" shank burs. Has 7 marked holes for drill bits 1/16" to 5/32". 3" deep x 2 3/4" dia. center cup holds small tools such as files and screwdrivers. Measures: 6 1/2" wide x 4" high. Burs not included.
|
Foredom Carbon Motor Brushes for 1/6HP Series SR & SRH Motors.
|
Foredom Carbon Brushes for CC, MM, DD Motors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chuck Key
with Handle for flexible shaft machines with #30 handpiece. This plastic handle won't roll
around the bench. You get a better grip, making changing tools quicker
and easier.
|
Foredom
Double Motor Hanger with MABC-2 Base which screws to top or side of
bench. Includes 2 Spring Safety Clips and MAHR-2 Handpiece Rest. An
advantage of this model is that it can be wall mounted by using the top
hexagonal support rod to hold a single motor. The Handpiece Rest will
not work when the MH2 hanger is mounted on the wall.
|
Powerful
variable speed bench lathe in a compact size suitable for use at the
workbench. Its permanent magnet motor is extremely quiet and smooth
running with all the power and speed required for a variety of polishing
and buffing jobs.
Cast iron base has suction cup feet for a secure hold on the work surface.
Lathe comes with tapered spindles for holding buffs and brushes up to 4 inches in diameter.
-
1/16 HP high torque motor
-
5/16" diameter motor shaft
-
500 - 7,000 RPM
-
Weight - 7.5 lbs
-
Height - 5 1/8"
-
Width - 13" between spindles
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foredom Brushless Micromotor Kit: High Torque Performance from 1,000 - 50,000 rpm. Fastest and most powerful handpiece in Foredom's line. The high speed (up to 50,000 rpm) gives exceptionally smooth cuts and even when used more slowly it will not bog down. This kit makes signing your work easy. It has a sealed housing that prevents dust and debris from clogging your motor and since it is brushless, you never have to replace carbon brushes. The dual port on the control box allows you to add a brush type handpiece.
|
German-made
Antilope File Set - each set includes 1 each of Equalling, Round,
Square, 3-Square, Half-Round and Knife needle files.
Please choose 100mm, 140mm or 160mm length in cut 0 (Coarse), 2 (Medium) or 4 (Fine).
|
|
|