glass kiln, silver kiln, jewellery kiln, jewelry kiln

  Home > Tools & Machinery > Casting & Wax Carving >

Silver and Glass Kiln with Stainless Steel Door and Window
Digital Silver and Clay Kiln with Window


 

Our Price:
$1,495.00

Product Code: SCPROWIN
Qty:

Description
 
The sleek SC-2 Pro with Window has a ceramic fiber firing chamber, and features a brushed stainless steel door with an easy-to-open 9" long wooden handle. The door opens and closes gently with an adjustable, spring-loaded catch on the bottom. The control panel is sloped for easy viewing and operation of the controller. The door on the kiln opens 180 degrees to give you full access to the interior. The SC-2 Pro also has an easy access back panel for quick maintenance.

The SC-2 Pro elements are powerd by a quiet, solid state relay. Thge sold state relay is backed by a mechanical safety relay that turns off the eating elements should the solid state relay ever fail.

Try the amazing Art Clay Silver, PMC silver clay, and even glass clay. Shape these clays with simple tools. Firing the clays in a kiln to the correct tmperature turns the clays into solid silver or glass. Fire china paint, enameling and glass fusing in minutes. Create unique jewellery that you cannot buy in a store. the SC-2 Pro fires up to 2000°F

The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due o the air gap under it. In addition, the case is slotted for air circulation. Electrical components, located in the case, stay cool during extended hold times.

The SC-2 Pro can hold three shelves of silver clay, yet is portable enough to take with you. Program the firing schedule as needed for your projects. The kiln turns itself off after the firing is completed. Elements are embedded in creamic fiber.

Separate heating elements in the left and right sides of the firing chamber. The back of the chamber has no element, providing even heat distribution because heat does not build up in the back.

This digital kiln fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time.
Features
  • SC-2 Pro Features:
    • on/off switch
    • solid state relay
    • mechanical safety relay
    • door opens 180 degrees for easy loading
    • slotted case for air circulation
    • electrical components in the base stay cool at extended hold times
    • embedded side elements for improved heat disribution
    • top vent with tapered plug for lost wax casting
    • 1/4" thick ceramic fiber shelf
    • power cord located out of the way at the back of the cabinet
    • includes glass view port

    Sentry Xpress 3-Key Digital Controller Features:
    • design programs with up to 8 segments (steps) in ramp-hold mode
    • fire to a single temperature at a single speed in the quick and simple single speed mode
    • Ramp-hold mode can store 4 programs
    • skip a segment in ramp-hold during firing without having to stop the kiln to reprogram
    • change the target temperature in ramp-hold during firing without having to stop the kiln to reprogram
    • add hold time during firing without having to stop the kiln to reprogram
    • hold (soak) the temperature in both single speed and ramp-hold
    • control both heating and cooling in ramp-hold
    • program review lets you check the program before a firing
    • temperature display throughout firing in your choice of °F or °C
    • thermocouple offset adjusts the thermocouple readout
    • set the delay to turn on the kiln later to suit your schedule
    • error messages report mechanical problems
    • LED lights show ether you are in program, review or firing mode