| Rolling Mill D2 Stacked w/Reduction Gear 120mm |
|
|
D2 Stacked Rolling Mill w/Gear 120mm by Durston
The D2 'Stacked Mill' is the first choice for busy workshops, schools and colleges needing maximum sheet rolling width and a full range of wire reducing grooves (with groove indicator) from as much as 15mm initial material size down to 1mm square.
The machine has two sets of rolls, one for sheet (extended for D shapes) and the other grooved for square wire.
These are set in high quality maintenance free bearings and are guaranteed for life.
As with the whole of the Durston range of mills, the rolls are of the highest quality alloy steel hardened to 63 / 64 Rockwell C and ground to perfection.
Excellent gearing ratio offering reduction of 7 - 1 for sheet and 3.5 - 1 for wire, allowing smooth manual operation.
Calibrated disc in central easy to read position.
CE Approved highest standard of engineering excellance for the European market.
Exclusive to Durston Mills are the extension rolls.
Life time guarantee on the bronze oilite bearings.
All rolls are of the highest quality swedish steel, hardened to 67/64 Rockwell C, and ground to perfection.
Extremely versatile and very rugged in construction, this machine is very simple to use with full control over roll passes for both sheet and wire.
Roll Size 120mm x 60mm
Sheet Capacity (thickness) 7mm
Width of Sheet 120mm
Wire Capacity 15mm - 1mm
No. of Wire Grooves 19
Gear Ratio Sheet 7 - 1
Gear Ratio Wire 3.5 - 1
Extension Rollers
Click for more detail
4 'D' grooves 4, 3, 2 & 1.5mm
Dimensions in mm 380 x 200 x 580 |
|
|
|