Home > Tools & Machinery > Polishing & Abrasives > Polishing Accessories
Polishing Accessories
  Miniature Mandrels
Sort By:
Page of 2
Respirator Mask 3M  8511 - Vapor Respirator Welding/Solder 3M  8515 Emery Ring Shell Mandrel, 4-1/4" Long, 1/8" Arbor Hole Filter Replacement for Dust Collector 12 X 32 X 2 Inches

FINGER GUARDS (10) OPEN FINGER GUARDS (10) CLOSED 962C THUMB GUARDS (10) CLOSED 962F Splash Hood Super Flow  Dust Control
FINGER GUARDS (10) OPEN

Our Price:
$16.95

Respirator Particulate 3M  N95 Tapered Wood Mandrel, 6" Long, 1/4" Arbor Hole Split Wood Mandrel, 1/4" Arbor Hole Crimped Brass Wire Brush, 4 Rows of Wire, 3" Diameter

Straight Steel Wire Brush, 5 Rows of Wire, 4" Diameter Straight Steel Wire Brush, 6 Rows of Wire, 6" Diameter Adjustable Handle with Chuck for TPR Spindle SPINDLE BALDOR 3/8 RIGHT TSP

End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc., can be used on larger polishing motors. The chuck opens from .085" to .128" to fit 3/32" and 1/8" mandrels. Overall lenght 3-1/2"

SPINDLE BALDOR 3/8 LEFT TSP Threaded Screw Mandrel, 3/32" Shank 1/16" Mandrel with Reinforced Screw, 1/8" Shank 1/16" Wheel Mandrel with Screw, 1/8" Shank

1/4" Grinding Wheel Mandrel with Screw, 1/8" Shank Bur Chuck Steel for 1/4 Inch Shank - Right Side of Motor THUMB GUARDS (10) OPEN Walnut Shell Charged by Vigor 5 Lb. box
THUMB GUARDS (10) OPEN

Our Price:
$17.95

FLEXIBLE DIAMOND 250,125, 74 micron KIT Rubber Finger Cots  Sold by the Dozen Straight Steel Wire Brush, 2 Rows of Wire, 4" Diameter MANDREL SCREW REINFORCED 3/32

Multiple Options Available

Split Mandrel for Handpiece, 2-1/4" Long, Straight 1/8" Wheel Mandrel with Screw, 1/8" Shank MANDREL TAPER THREAD 3/8 IN 3/32 MANDREL FOR CYLINDER CRSS 3/32 SHANK

Mandrel for 2mm point abrasives 3/32 shank Emery Round Buff Sticks Set of 6 Emery Half-Round Sanding Sticks Set of 6 Mandrel Screw 3/32  Nickel Plated

Round sanding sticks for inside rings and curved surfaces, such as bangles. Emery sticks in 6 grits: 6/0, 4/0, 3/0, 2/0, 1 and 2.. Excellent for all precious
metals and PMC. Each measures a total of 9 1/4" with a sanding surface
of 6" which tapers from 3/4" wide to 5/16" at the tip.
Tapered, half-round sanding sticks for flat surfaces. Emery sticks in 6 grits: 6/0, 4/0, 3/0, 2/0, 1 and 2.
Excellent for all precious metals and PMC.
Each stick measures a total of 9 1/4" with a sanding surface of 6" which tapers from 3/4" wide to 5/16" at the tip.

1/8" Grinding Wheel Mandrel with Screw, 1/8" Shank Finger Pro Wrap Tape 3/4 Inch Width Threaded Screw Mandrel, 3/32" Shank Adaptor chuck mandrel for small drills or posts

Multiple Options Available